Cera-Lube™ Nano Ceramic Lubricating Grease is a leading edge, extremely high-performance lubricant that has a wide range of industrial applications. Cera-Lube™ utilizes
nano ceramic particles that act as sub-microscopic ball bearings, providing continuous lubrication to metallic surfaces. Cera-Lube™ gives you 10x the normal life, a much lower
coefficient of friction at all temperatures, extraordinary adhesion, and higher load-bearing properties than traditional “high performance greases”.
Superior performance.
Better value.
|
|
Cera-Lube™ - The Ultimate in Machine Lubrication
Key components in Cera-Lube™ are "nano ceramic structures" that have an affinity for steel and provide continuous lubrication at the surface.
These are blended over calcium sulfonate thickener within a midviscosity petroleum-based paste.
This creates an extremely durable grease with a super low coefficient of friction, extraordinary adhesion, a superior temperature operating range, and exceptional shear pressure and anti-corrosion properties. |
Product Description:
Cera-Lube™ is a high-performance, highly stable lubricant that delivers unmatched performance, durability, and wear resistance.
Cera-Lube™ outlasts
PTFE greases in the same applications by ten times due to its lower friction coefficient and its ability to operate at a wider range of temperatures!
Nano ceramic particles—the key component—offer a lower coefficient
of friction at all temperatures.
Cera-Lube™ has high load-bearing properties; a low
dielectric constant; does not contain metal or
silicone; and is resistant to water, steam, acids, and most chemical products.
This gives the lubricant greater staying power, even under intense pressure and temperatures.
Features/Benefits:
● Staying Power—extraordinary adhesion extends production to 10 times that of other greases.
● Shear Stability—does not soften or run out. After 100,000 production strokes, shows no evidence of breaking down.
● Operating Temperatures—operates in a normal range from –40° F to 800° F, plus ceramic particles remain intact up to 2500° F.
● Extreme Pressure & Anti-Wear Protection—resists EP, provides exceptional stability without using lead, antimony, chlorine, zinc, barium, etc.
● Corrosion Resistant—resists water, steam, acid, and other chemicals.
●
High Dropping Point—maintains
viscosity across full temperature range, returning to normal viscosity after cooling.
● Low Coefficient of Friction—lower than PTFE greases.
● Chemically Insert—environmentally friendly.
● Low Dielectric Constant—excellent insulator.
● NSF Food Certified Available.
Applications:
Cera-Lube™ can be used in all types of applications from general purpose to extreme pressure and temperature environments—even in areas where incidental food contact may occur.
Applications include (but are not limited to) the following:
■ Bearings
■ Bushings
■ Cables
■ Cams
■ Chains |
■ Conveyors
■ Gears
■ Lifters
■ Machine Parts
■ Robotics |
■ Rods
■ Slides
■ Wear Plates |
Industries Served:
■ Aerospace
■ Agricultural
■ Automotive
■ Consumer
■ Marine |
■ Material Handling
■ Medical/Scientific
■ National Defense
■ Pharmaceutical
■ Heavy Hauling |
■ Food Processing
■ Plastics Processing
■ General Manufacturing |
Cera-Lube™ NanoCeramic Lubricating Grease
A Better Way. A Better Value.
Cera-Lube™ is an extraordinary, state-of-the art lubricating grease. It provides exceptional friction reduction and wear resistance, and outlasts and outperforms virtually all other lubricating greases on the market. It is also the best value on the market today. When compared with the price of our closest competitor (using nanotechnology), the per ounce cost for Cera-Lube is considerably lower. Also, traditional PTFE lubricants are priced lower; however, the real value can be found in comparing the real life of the lubricants and considering the additional cost of maintenance and downtime. Cera-Lube™ remains on the surface longer, extending production up to ten times that of PTFE lubricants. Further, Cera-Lube™ has much greater shear stability than other lubricants. In laboratory and in on-site tests, the change in penetration after 100,000 strokes is low—meaning the grease did not soften under shear. Both longer run times and greater shear stability mean less total product cost less, maintenance, and far less downtime for lubricating. In addition, Cera-Lube™ operates in a far wider range of temperatures than traditional lubricants, making it more versatile than PTFE products. For all practical purposes, you simply cannot purchase PTFE lubricants that will operate in this wide temperature range. Also, it is environmentally friendly and NSF food grade approved. Nanoplas products represent the best of the best, offering both top quality and outstanding value. Cera-Lubeis no exception.
Ordering Information:
Cera-Lube™ Nano Ceramic Lubricating Grease is ordered by quantity and product numbers. Products can be ordered individually or by the case, which contains twelve (12) individual 16-oz. tubes.
The product number for the tube is CLG1000.
The product number for the case is CLG1001.
NSF Food Contact Certified
The product number for the tube is CLGF1000.
The product number for the case is CLGF1001.
